Freewing F-14 TOMCAT User Manual page 10

Landing Gear Installation
Main Gear Assembly
Please refer to the following photos to assemble and disassemble the main
landing gear
List of parts and specs.
A-Retract controller
B-Grub screw (M4•4mm)
C-Rear gear main rod
D-Grub screw (M4x4mm)
E-Rear gear main supporting rod
F-Rear wheel axle
G-Wheel (060x17mm)
H-Washer
I -Rear gear shock absorber active rod
J -Spring
K -Spring guide post
L-Spring
M-Screw (M3x5.2mm)
N -Screw (PWA3x12mm)
Q - Rear gear blister piece (left/right)
D
•· ·
•
s
ilr .
-A
StepO
@
Servo Introduction
A servo or reversed servo is defined as
follows:
When the servo input signal changes
from 1000ųs to 2000ųs, if the servo arm
rotates clockwise, it's a positive servo.
If it rotates counter clockwise, it's a
reversed servo.
If you need to purchase other brand
servo, please refer to the following
list to choose correct size servo.
No. Pos./Rev. Servo Cable Length
Installing position
Front Gear Door 9g MB 1 Positive
Nose Gear steering 9g MB 2 Positive
Aileron (L) 17g MG 3 Positive
Aileron (R) 17g MG 4 Positive
Flap (L) 17g MG 5 Positive
Flap (R) 17g MG 6
Elevator (L) 17g MG 7 Positive
Elevator (R) 17g MG 8 Reverse 650 mm
Rudder (L) 17g MG 9 Positive 180 mm
Rudder (R) 17g MG 10 Positive 180 mm
F-14Tomcat
Item No.,
FJ308
Version No.,
FJ308-VO I
�-
F
H
G
Step 6
850 mm
750 mm
650 mm
650 mm
500 mm
Reverse 500 mm
650 mm
1 I
I
1;
J
K 11
M
- �
�
-9-
EN
--- - -- -0
Step 8
..