Advertisement
Quick Links
IES308 Series
Industrial Ethernet Switch
User manual
Shenzhen 3onedata Technology Co., Ltd.
Tel: +86-755-26702668 Fax: +86-755-26703485
www.3onedata.com
【Summarize】
IES308 series is an industrial grade, unmanaged Ethernet switch.
The IES308-P (12/48VDC) industrial Ethernet switches consists
of 8 Ethernet ports. The IES308-1F-P (12/48VDC) consists of 7
Ethernet ports and 1 Fiber ports. The IES308-2F-P (12/48VDC)
consists of 6 Ethernet ports and 2 Fiber ports that provide an
economical solution for your industrial Ethernet connection. Its
dustproof fully sealed structure(protective case of IP30 level),
over-current, over-voltage and EMC protected redundant double
power input as well as built-in intelligent alarm design can help
system main tenancy personnel monitor the network operation,
which can work reliably in harsh and dangerous environment.
【Packing list】
The industrial Ethernet switch is shipped with the following items.
If any of these items are missing or damaged, please contact your
customer service representative for assistance.
Industrial Ethernet switch ⅹ 1
User manual ⅹ 1
DIN-Rail mounting kit ⅹ 1
Warranty card ⅹ 1
【Feature】
Support IEEE802.3, IEEE802.3u, IEEE 802.3x
Ethernet port support Plug-and-play, 10/100M, F/H duplex,
MDI/MDI-X auto negotiation
Broadcast storm protection
Support 2K MAC address
Support 1.6Gbps backboard bandwidth
Support DC power redundancy 12~48VDC power input
Support 1 channel relay alarm output
Industrial grade 4 design, -40-75℃work temperature
No fan deign
IP30 protection grade
DIN rail mount
- 1 -
【Panel layout】
Vertical view and bottom view
Front panel view
IES308
IES308-1F
1. Power input terminal block
2. Ground screw
3. DIP switches for Ports and Power alarm
4. 2-pin terminal block for relay output
5. Screw holes for Wall Mounting Kit
6. DIN-Rail mounting kit
7. Relay alarm LED
8. System running LED
9. Power indicator (PWR1, PWE2)
10. Link/ACT LEDs
11. 10Base-T /100Base-TX Ethernet port
12. 100Base-FX fiber port
Rear view
IES308-2F
Advertisement
Related Manuals for 3onedata IES308-1F-P
Summary of Contents for 3onedata IES308-1F-P
-
Page 1: Panel Layout
Rear view The IES308-P (12/48VDC) industrial Ethernet switches consists of 8 Ethernet ports. The IES308-1F-P (12/48VDC) consists of 7 Ethernet ports and 1 Fiber ports. The IES308-2F-P (12/48VDC) consists of 6 Ethernet ports and 2 Fiber ports that provide an economical solution for your industrial Ethernet connection. -
Page 2: Dip Switch
【Dimension】 【Relay connection】 10/100Base-T(X) MDI (straight-through cable) The series of products are the same size, and the number of the Ethernet interface is different. Unit (mm) The relay consists of the two middle contacts of the terminal block on the switch’s top panel. The two terminal block connector are used to detect both power faults and port faults. -
Page 3: Led Indicator
middle; 2. Examine the cables and plugs that installation requirements. 3. Examine whether the cables be seemly or not (less than 100m) 5. Cables should be straight in the hallways and turning; according to reasonable scheme. 6. Cable should be straight in the groove, and cannot beyond the 4. - Page 4 Support DC dual power supply redundancy Warranty: 5 years Support overload Current Protection Consumption IES308-P (12~48VDC): Unload consumption: 1.5W@12VDC Full load consumption: 2.2W@12VDC IES308-1F-P (12~48VDC): Unload consumption: 1.7W@12VDC Full load consumption: 3.1W@12VDC IES308-2F-P (12~48VDC): Unload consumption: 3.6W@12VDC Full load consumption: 4.3W@12VDC Working environment: Working temperature: -40～75℃...