Table of Contents
Advertisement
Changing the IP Address of the Hub
The IP Address is the address used to locate and identify the hub on your
network. The default IP address of the hub is 192.168.1.50. On this screen you
may change the IP address and subnet mask allocated to your hub if you have
another device on your network which uses 192.168.1.50, for example. When
you have entered the new IP Address, click the
wish to cancel, click the
button.
Remote Management
If you wish to restrict access to the administration interface, you can do so here.
To restrict the access:
1. Check the Enable box.
2. Enter the range of IP Addresses you want to allow access to. If you only
want to allow one IP Address to have access, enter it in the first field
and leave the second field blank.
3. Click
to save your settings and continue. If you wish to cancel, click
the
button.
Remote Management Table
This shows a list of IP addresses which are allowed access to the administration
interface. You can remove selected ones by putting a check in the
corresponding box and selecting Delete Selected. If the Remote Management
button to continue. If you
24
Advertisement
Table of Contents
