Table of Contents
Advertisement
Connecting the Hub
Connect the Hub
1. Position your hub close to your router which is
already online. Connect an Ethernet cable from your
computer to one of the DEVICE ports on the back of
the hub.
2. Connect the supplied power adapter into the POWER
receptor on the back of the hub and then plug into a
power outlet or surge protector. Verify the power
light is lit.
3.
Make sure that your computer has an IP Address of
192.168.1.XX and a Subnet of 255.255.255.0. Refer to
the Troubleshooting section of the user manual for
more information.
4.
Open a web browser, enter http://192.168.1.50 and
then press Enter. When the login window appears,
set the user name to admin and leave the password
box blank. Click
to continue the setup. Please
refer to the user manual for more detailed
installation information and advanced features.
5. When you have completed the setup, move the hub to desired location and connect the power adapter. Connect the devices you want to use into the DEVICE ports
on the back of the hub.
13
Advertisement
Table of Contents
