Table of Contents
Advertisement
Backing up and Restoring Hub Settings
When you have configured the hub to your liking, you can back up the settings to
a file in case you want to make changes and you are able to easily revert back to
a trusted configuration.
To save the configuration, click the Save button. A window appears prompting
you to save the file named config.bin. Choose a place on your computer to save
the file and click the save button.
To restore the configuration from a previously saved configuration, click the
Browse button, select the file on your computer in the window which appears
and click Open. Click the Restore button. The router will update the settings
according to those in the config.bin file and reboot.
To restore the hub to the factory settings, simply click the Reset button. Be
aware that this will cause any configuration changes you have made to be lost.
Updating the Firmware of the RF-HTN102
From time to time, RocketFish may provide firmware updates to add or improve
the existing features of your hub. If you need to update the firmware, click the
Browse button and select the firmware file you downloaded and click Open. Click
the Upload & Update button to begin the firmware update process.
Note: The process of updating the firmware is a sensitive one. Ensure that you
have the selected the correct firmware for your device and do not turn off the
power to the router during the update.
26
Advertisement
Table of Contents
