Configuring Wireless Settings; Connecting To A Wireless Network - RocketFish RF-HTN102 User Manual

Configuring Wireless Settings

To connect to a wireless network using your hub, login to the hub and click the
icon. The Wi-Fi-2.4GHz Band page appears.

Connecting to a Wireless Network

To connect to another wireless network using 2.4GHz Wi-Fi:
1. Click the Scan button on the right hand side of the screen. A list of available
networks appears after the hub scans for networks in range, including
information about the broadcast channel, security type and signal strength. If
there are more than 10 networks found, you can press the Next button to see
those not listed on the first page.
2. Select the radio button for the network you wish to join. You can identify the
network by the SSID.
3. Click to proceed.
4. If the network is open, your hub will join the network and you are ready to begin
using your wireless hub. If there is security applied to the network, a new field
will appear above the Scan Table called Passphrase/PSK. Enter the passphrase
into the Passphrase/PSK field to join the network and click
5. You are now ready to begin using your wireless network.
to proceed.
28