Step And Ramp Modes; Auto Storage Of Settings - Fluke 714B User Manual

714B
Users Manual

Step and Ramp Modes

The Product allows you to set Step and Ramp modes for
easier check of points within the linear range in Source
mode.
To set the Step or Ramp mode:
1. Push .
2. Use  and  to select Step mode or Ramp mode.
The  or  icon shows on the Product display
accordingly.
Note
This function is only available when Source
mode is selected.
22
Shop for Fluke products online at:

Auto Storage of Settings

The Product automatically stores the latest settings,
including the temperature unit, the linear range of mA
converting to temperature, and sensor type.
Every time you turn on the Product, it automatically
applies the last settings.
MyFlukeStore
www.
1.888.610.7664
.com