Safety Information; Safe Working Practices - Fluke 714B User Manual

Safety Information

A Warning identifies conditions and procedures that are
dangerous to the user. A Caution identifies conditions and
procedures that can cause damage to the Product or the
equipment under test.
International electrical symbols used on the Product and in
this manual are explained in Table 2.

Safe Working Practices

Review the safety information and comply with the safe
working practices.
Warning
To prevent possible electrical shock, fire, or
personal injury:
•
Carefully read all instructions.
•
Read all safety Information before you
use the Product.
•
Use the Product only as specified, or the
protection supplied by the Product can
be compromised.
•
Do not use the Product around explosive
gas, vapor, or in damp or wet
environments.
•
Never apply more than 30 V between any
two terminals, or between any terminal
and earth ground.
Shop for Fluke products online at:
•
Do not connect any test leads to voltages
above 30 V when used with the product,
even if ratings above 30 V appear on the
test leads.
•
Do not use and disable the Product if it is
damaged.
•
The battery door must be closed and
locked before you operate the Product.
•
Remove all probes, test leads, and
accessories before the battery door is
opened.
•
Remove the input signals before you
clean the Product.
•
Have an approved technician repair the
Product.
•
Replace the batteries when the low
battery indicator shows to prevent
incorrect measurements.
For safe operation and maintenance of the
Product:
•
Repair the Product before use if the
battery leaks.
•
Remove the batteries if the Product is not
used for an extended period of time, or if
stored in temperatures above 50 °C. If the
batteries are not removed, battery
leakage can damage the Product.
MyFlukeStore
www.
Thermocouple Calibrator
Safety Information
3
1.888.610.7664
.com