Table of Contents
Advertisement
Quick Links
ROTATOR
TM
COMBI SAW
12V
INSTRUCTION MANUAL
SPECIFICATIONS
Input:
12V
No Load Speed:
600-2500spm
Stroke Length:
14mm
Blade Fitment:
Bayonet
Max. Cutting Capacity:
Timber 30mm
PVC Tube 16mm
Steel 3mm
Battery:
1.3Ah Li-ion
Charge time:
3 - 5 hours
Weight:
1.4kg
ozito.com.au
WHAT'S IN THE BOX
Cordless Combi Jigsaw
Blades
Charger
Adaptor
JSC-2000
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Ozito JSC-2000
Summary of Contents for Ozito JSC-2000
- Page 1 Blades INSTRUCTION MANUAL SPECIFICATIONS Input: No Load Speed: 600-2500spm Stroke Length: 14mm Charger Blade Fitment: Bayonet Max. Cutting Capacity: Timber 30mm PVC Tube 16mm Steel 3mm Battery: 1.3Ah Li-ion Charge time: 3 - 5 hours Weight: 1.4kg ozito.com.au Adaptor JSC-2000...
- Page 2 KNOW YOUR PRODUCT SETUP & PREPARATION ROTATOR COMBI SAW 1. BATTERY 1 Saw Arm Swivel Button 5 Variable Speed Dial (not shown) This tool is recommended for the use with a residual current device with a rated residual current of 30mA or less. 2 Quick Release Blade Clamp 6 On/off Trigger Charging...
- Page 3 OPERATION 2. SETUP 3. CONTROLS Installing Blades Extending the Saw Arm 1. Depress the swivel 1. Press and hold the button with one hand. quick release blade clamp down. 2. Blade can be installed with the teeth facing forward or backward 2.
- Page 4 Recip Mode 1. P ress the base firmly 2. Turn the combi saw on. against the work piece. 3. Keep the base against the workpiece throughout the cut. Note: Do not force the tool. Let the tool do the work. JSC-2000...
- Page 5 Spare parts can be ordered from the Special Orders Desk at your local Bunnings Warehouse. Note: Ozito Industries will not be responsible for any damage or injuries caused by repair of the saw by an unauthorised person or by For further information, or any parts not listed here, visit mishandling.
- Page 6 Tool: 12V ROTATOR Combi Saw SPARE PARTS Model No. JSC-2000 The following is a list of spare parts carried by Ozito. Please contact Customer Service for any parts not listed. Item No. Description Part No. Item No. Description Part No.
- Page 7 Replace the extension lead if damaged or defective. Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand. When using an extension lead on a reel, always unwind the lead completely. Use of an extension lead not suitable for the power input of the tool or which is damaged or defective may result in a risk of fire and electric shock.
- Page 8 • Failure to perform maintenance as set out within the instruction manual. • If the tool is disassembled or tampered with in any way. OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175. 0513...
Need help?
Do you have a question about the JSC-2000 and is the answer not in the manual?
Questions and answers