Page 2
KNOW YOUR PRODUCT SETUP & PREPARATION CORDLESS RECIPROCATING SAW 1. ASSEMBLY 1 Timber Cutting Blade 5 Variable Speed Trigger 2 Pivoting Shoe (Adjustable) 6 Sure Grip Handle WARNING! ENSURE THE TOOL IS SWITCHED OFF AND 3 Blade Holder 7 Lock-Off Button THE BATTERY IS REMOVED BEFORE PERFORMING ANY OF THE FOLLOWING TASKS.
Page 3
2. BATTERY & CHARGING (sold separately) Charging your lithium ion battery - Eco Charger CAUTION: THE CHARGER FOR THIS PRODUCT SHOULD 1 Connect the charger into a mains power outlet. BE PROTECTED BY A RESIDUAL CURRENT DEVICE (RATED AT 30MA OR LESS). 2 T he charger LED will flash green showing power Charging your lithium ion battery - Fast Charger...
Page 4
Do not apply excessive pressure, allow the blade to do the work. CAUTION: DO NOT ALLOW THE TOOL TO BOUNCE. IF THE PIVOT SHOE IS HELD AWAY FROM THE WORK PIECE DURING OPERATING, STRONG VIBRATION AND/ OR TWISTING MAY OCCUR CASUING THE BLADE TO SNAP DANGEROUSLY. PXRSS-400...
Page 5
• When not in use, the reciprocating saw should be stored in a dry, frost free location not within the reach of children. Note: Ozito Industries will not be responsible for any damage or injuries caused by the repair of the reciprocating saw by an CARING FOR THE ENVIRONMENT unauthorised person or by mishandling of the reciprocating saw.
Page 6
Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand. The power supply for this products charger should be protected by a residual current device (rated at 30mA or less).
Page 7
AND ANSWER ANY QUESTIONS YOU MAY the terms of this warranty. You have the option to register your HAVE RELATING TO THE WARRANTY POLICY product with Ozito on www.ozito.com.au/registrations for an OR PROCEDURE. extended warranty of 2 years within four weeks of purchase. The...
Need help?
Do you have a question about the PXRSS-400 and is the answer not in the manual?
Questions and answers