Tracking Function; Threat Potential Evaluation Function; Collision Avoidance Computation And Resolution Advisory Display Function; Traffic Advisory Display Function - Honeywell CAS-100 Maintenance Manual

Collision avoidance system
Table of Contents

Advertisement

CAS-100 COLLISION AVOIDANCE SYSTEM
(2)

Tracking Function

• Tracks maximum 45 combined Mode S and Mode A/C transponder equipped intruder
aircraft. Tracks range of intruder aircraft. Tracks intruder relative bearing if tracking is
occurring on a directional antenna. Tracks intruder relative altitude if intruder is
reporting altitude.
• Calculates estimated intruder relative position.
• Calculates closing range rate.
• Calculates altitude change rate if intruder is reporting altitude.
• Estimates miss distance.
NOTE: Surveillance and tracking functions are performed by listening for Mode S
squitters, Mode S and ATCRBS Mode C interrogation transmissions, and Mode
S and ATCRBS Mode C reply receptions on the top and bottom TCAS antennas.
(3)

Threat Potential Evaluation Function

• Determines the threat potential of intruder aircraft based on results using tracking data.
• Categorizes intruders as RAs, TAs, proximities, or nonthreats.
(4)

Collision Avoidance Computation and Resolution Advisory Display Function

When an RA threat aircraft is present, TCAS finds the applicable vertical maneuvering
for own aircraft to get or keep a safe miss distance between own aircraft and intruder
aircraft. This maneuvering is done while creating the least change from own aircraft
vertical rate. TCAS communicates the recommended maneuver to the pilot with a
resolution advisory display on the TA/VSI or RA/VSI units.
(5)

Traffic Advisory Display Function

Gives a display of RA, TA, proximity, or nonthreat category traffic that are present in the
adjacent airspace. The traffic display shows the position and the threat potential of
intruder aircraft which alerts the flight crew to potentially dangerous conditions.
Depending on the aircraft equipment, the traffic display can come into view on a TA/VSI
unit or an optional PPI or dedicated TCAS display unit.
(6)

Aural Alert Function

Gives voice message advisory alerts on the cockpit audio system.
Use or disclosure of information on this page is subject to the restrictions in the proprietary notice of this document.
MAINTENANCE MANUAL
34-45-47
Page 38
1 Dec 2003

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents