Honeywell CAS-100 Maintenance Manual page 165

MAINTENANCE MANUAL
CAS-100 COLLISION AVOIDANCE SYSTEM
(6) Configuration Display Screen
To push the Select button when the Configuration is the Active Selectable Item on the
Menu screen causes the Configuration Screen to come into the view. A representation
of a two page Configuration screen is shown in Figure 1007.
The screen title is CONFIG. The lines two, three, and four of page 1/2 contain the
software part number(s). To push the Scroll button causes page 2/2 of the CONFIG
screen to come into the view. The hardware part number and the unit serial number are
shown on the screen. The Active Selectable Item is GO BACK. To push the Select
button while the caret is at GO BACK causes a return to the Menu screen.
Typical Configuration Display Screen
Figure 1007
Page 1024
34-45-47
1 Dec 2003
Use or disclosure of information on this page is subject to the restrictions in the proprietary notice of this document.