Table of Contents
Advertisement
WARNING To avoid fire, shock, and serious personal injury, follow these instructions.
1.
2. Before servicing or cleaning unit, switch power off at fuse box and lock to prevent power
on accidentally. When the fuse box cannot be locked, securely fasten a warning device, such as a tag, to the
fuse box.
3. Be careful of the fan and blades when cleaning, painting, or working near the fan. Always turn off the power to
the ceiling fan before servicing.
4. Do not put anything into the fan blades while they are turning.
5.
1. To avoid possible shock, be sure electricity is turned off at the fuse box before wiring, and do not operate fan
without blades.
2. All wiring
be in accordance with AS/NZS 3000 "The Wiring Rules". The ceiling fan
precaution against possible electrical shock. Electrical installation should be
electrician.
3.
4. The downrod furnished with the fan provides the
5. The fan
be
with the fan blades.
6. Your licensed electrician
ceiling fan.
NOTE: This fan is not suitable for use with solid-state speed controls.
WARNING: To reduce the risk of fire or electric shock, this fan should only be used with fan speed control
supplied.
WARNING: This product is designed to use only those parts supplied with this product and/or any accessories
designated specifically for use with this product by
WARNING: To reduce the risk of personal injury, do not bend the blade flange when installing the blade flanges,
balancing the blades or cleaning the fan. Do not insert foreign objects in between rotating fan blades.
WARNING: To reduce the risk of electrical shock, this fan
control/switch.
THIS FAN IS SUITABLE FOR DAMP LOCATIONS SUCH AS
COVERED PORCHES, COVERED PA
ANYWHERE THERE IS A ROOF OVERHEAD.
DATE CODE:
The date code of this fan may be found on the box, stamped in ink on a white label.
You should record this data above and keep it in a safe place for future use.
WARNING
Safety Instructions
Additional Safety Instructions for Installation
with the fan blades at least 2.1
follow the
floor to fan blade clearance for a
the floor to prevent accidental contact
instructions for the proper
Electric Co. Substitution of parts or accessories not
be installed with an isolating wall
2
being switched
be grounded as a
or approved by a licensed
of wiring your
Model No.: ACF765
Advertisement
Table of Contents
