Philips VRZ360 Operator's Manual page 9

VRZ360 4/7/99 9:53 PM
Hookups With a Cable Box/Direct Broadcast System (cont'd) 9
With this connection:
• You may watch one channel while recording another.
• You may not record scrambled channels.
1
VCR
AUDIO
VIDEO
CH3 CH4
Cable signal
RF coaxial cable
Connections
1
Connect a Cable signal to the VCR's ANT(enna) IN jack.
2
Use an RF coaxial cable (supplied) to connect the RF OUT jack on
the VCR to the IN jack on the Cable Box/DBS.
3
Use a second RF coaxial cable to connect the OUT jack on the
Cable Box/DBS to the TV's ANTENNA IN jack.
Recording One Channel/Watching Another
1
Put the Cable Box/DBS on the same channel as the VCR's
CH3/CH4 switch. Then, with the VCR in VCR position (the VCR
light will appear on the display panel), use the CH(annel) 8/9
buttons to select the channel you want to record at the VCR.
Start the recording.
2
Press the VCR/TV button once to put the VCR in TV position.
(The VCR light will disappear.)
3
Set the TV to the Cable Box/DBS output channel (03 or 04).
4
Select the channel you want to watch at the Cable Box/DBS.
Page 9
2 Cable Box/DBS
IN IN OUT OUT
ANT.IN
IN
R
L
RF OUT
RF coaxial cable
C A B
OU T
3
• When you play a tape, make sure
the Cable Box/DBS is set to the
same channel as the CH3/CH4
switch on the VCR. Set the TV to
the Cable Box/DBS output channel
(03 or 04).
7 5
A N T
/
L E
TV's
ANTENNA
IN jack
Helpful Hint