Hookups With A Cable Box/Direct Broadcast System - Philips VRZ360 Operator's Manual

Philips video cassette recorder owner's manual
Hide thumbs Also See for VRZ360:
Table of Contents

Advertisement

VRZ360
4/7/99 9:53 PM

8 Hookups With a Cable Box/Direct Broadcast System

There are two ways to connect your Cable Box/DBS to the VCR. With this connection:
You may view any channel.
You must select channels at the Cable Box/DBS. Channels cannot be changed at the VCR.
You may not view a channel other than the one you are recording.
You may not set up channels at the VCR.
You can only program a timer recording for one channel at a time. Set the TV and the VCR to the Cable
Box/DBS output channel (channel 03 or 04), and set your Cable Box/DBS to the channel you want to
record. When you enter the channel you want to record in a timer recording, select channel 03 or 04
(the Cable Box/DBS output channel). (This is step 3 on page 36.) Leave the Cable Box/DBS on for a
timer recording.
1
Cable Box/DBS
IN
Cable signal
RF coaxial cable
Connections
1
Connect a Cable signal to the IN jack on the Cable Box/DBS.
2
Use an RF coaxial cable (supplied) to connect the OUT jack on
the Cable Box/DBS to the ANT(enna) IN jack on the VCR.
3
Use a second RF coaxial cable to connect the RF OUT jack on the
VCR to the TV's ANTENNA IN jack.
Recording/Viewing Any Channel
1
With the VCR on and in VCR position (the VCR light will appear
on the display panel), use the CH(annel)
VCR to the Cable Box/DBS output channel (channel 03 or 04).
2
Set the TV to the same channel to which you set the VCR.
3
Select the channel you want to view/record at the Cable
Box/DBS.
Page 8
2
VCR
OUT
8/9 buttons to set the
IN
IN
OUT
OUT
ANT.IN
R
AUDIO
L
RF OUT
VIDEO
CH3 CH4
RF coaxial cable
7 5
A N T
/
C A B
L E
TV's
3
ANTENNA
IN jack

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vrz360at99Vrz360atRespironics v200

Table of Contents