On-Screen Status Displays 25 - Philips VRZ360 Operator's Manual

VRZ360 4/7/99 9:53 PM
An on-screen status display, which includes the current time,
channel, and other information (see illustration of the status dis-
play at right), will appear when you press the EXIT/STATUS but-
ton or certain function buttons. The contents of the status display
may vary.
ON SCREEN MODE ON:
Whenever you press the PLAY 8 button or the STOP 9 but-
•
ton to stop playback, some of the contents of the status display
will appear for five seconds.
ON SCREEN MODE COUNTER:
• The tape counter will appear on-screen at all times. Whenever
you press the PLAY 8 button or the STOP 9 button to stop
playback, some of the contents of the status display will appear
for five seconds. After five seconds, only the counter will remain
on the screen.
ON SCREEN MODE OFF:
• No status display will appear when you press function buttons
or the EXIT/STATUS button.
To select a status display mode, follow these steps.
1
Press the VCR button, then press the MENU button.
SELECT , 9 CHOOSE :/OK
A VCR SET UP
TUNER SET UP
INITIAL SET UP
TO END PUSH EXIT
2
Press the PLAY 8 or STOP 9 button to select VCR SET
UP, then press the FF :/OK button.
SELECT , 9 CHOOSE :/OK
A ON SCREEN MODE
TIMER REC SPEED MANUAL
VIDEO STABILIZER
PICTURE NORMAL
AUDIO OUT
STEREO/SAP
TO END PUSH EXIT
3
Press the PLAY 8 or STOP 9 button to select ON
SCREEN MODE, if necessary.
4
Press the FF :/OK button repeatedly so that ON,
COUNTER, or OFF appears beside ON SCREEN MODE.
5
Press the EXIT/STATUS button.
Page 25
ON
OFF
HIFI
STEREO

On-Screen Status Displays 25

Sound program available
Button pressed
STOP
STEREO
REMAINING
TIME 10:59 INDEX -1
SLP 0:00:00 HIFI
Tape
speed
Sound program
selected
Real-time counter
Tape time remaining
Helpful Hints
• If ON SCREEN MODE is set to ON
or COUNTER:
• You may bring up the status dis-
play at any time by pressing the
EXIT/STATUS button. (The excep-
tion is during Slow, Search, or Still
mode.) The display will appear for
about five seconds.
• Channel numbers (when tuned)
will appear for a few seconds.
• When tape playback is stopped,
press the EXIT/STATUS button to
see the time, real-time counter, or
current channel number on the dis-
play panel. During tape playback,
press the EXIT/STATUS button to
see the time or real-time counter on
the display panel. The channel will
not appear.
• Depending on the type of tape
used, the tape time remaining may
not appear right away, or may not
be correct. Also, "– – : – –" may
appear, or the display may flash.
Channel
Time
12:00 PM
CH. 12
Index
operation