Timer Recording With The Vcr Plus+ Programming System - Philips VRZ360 Operator's Manual

VRZ360 4/7/99 9:53 PM
Timer Recording With the VCR Plus+ Programming System (cont'd) 35
5
Press the FF :/OK button. If the VCR PLUS+ and CABLE/TV
channel lists appear on-screen, the CABLE/TV channel has not
been set for the VCR PLUS+ channel of the program you have set
in step 4. Complete steps 6 - 7 on page 33.
6
• If you want to record the program one time only, go to
step 7. You may also press the Number 8/DAILY or 9/WEEK-
LY button repeatedly to select a ONE TIME PROGRAM.
• If you want to record the program daily, press the
Number 8/DAILY button. The VCR will record a program
every day from Monday through Friday, starting at the same
time and recording for the same length of time.
• If you want to record the program every week, press
the Number 9/WEEKLY button. The VCR will record a
program on the same day, at the same time, for the same length
of time every week.
DAILY PROGRAM (MON-FRI)
PROGRAM 1
CHANNEL +/– 12
START +/– 08:00 PM
STOP +/– 10:00 PM
REC SPEED SP
DATE +/– 07/31/98
FRIDAY
SET DAILY=8 OR WEEKLY=9
TO END PUSH EXIT
7
Press the SPEED button to select the tape speed. The
selected tape speed, SP or SLP, will appear beside REC SPEED.
8
Press the EXIT/STATUS button. PROGRAM WAS COM-
PLETED/PLEASE TURN OFF VCR FOR TIMER RECORDING
should appear on the screen. (If PROGRAM NOT COMPLETED
appears, begin again from step 1.) After five seconds, the on-
screen display will disappear.
9
Press the POWER button to turn off the VCR. The VCR
must be turned off for a timer recording to take place.
r
The light will appear on the display panel. The
Cassette-Inside light will flash when you turn off the VCR if there
is not a tape in the VCR.
The VCR must be off for a timer
recording to take place!
Make sure a tape is in the VCR.
Page 35
8
6
7
• If ERROR appears at step 6 when
you select DAILY, the PlusCode pro-
gramming number you entered is
for a program that is broadcast on
Saturday or Sunday. The program
cannot be recorded repeatedly from
Monday through Friday.
• To exit the VCR Plus+ programming
system at any step, press the
r
light and the
EXIT/STATUS button.
• PROGRAM NOT COMPLETED/
CLASH may appear on-screen for
five seconds at step 8 if the timer
recording you programmed overlaps
with another timer recording. To
cancel the overlapping timer record-
ing, follow the steps on page 39.
TV VCR
9
– +
POWER
CBL/DBS
STILL/SLOW cEJECT
MENU
5
PLAY
REW FF /OK
EXIT/STATUS
:
;; ::
L
STOP
TIMER [REC/OTR
S.SEARCH
1 2 3
+ +
CH
START STOP DATE
4 5 6
– –
DBS DAILY WEEKLY
7 8 9
VOL
0
SPEED CLEAR
QUICK PROGRAMMING
7;;INDEX ::7 AUDIO/MUTE
VCR/TV
Helpful Hints