Bobbin Winding - AEG 110 User Manual

Preparing
To
Sew
Step 8

Bobbin winding

a: Pull out the Hand Wheel
Note:
When pull out the Hand Wheel
pull it as far as it goes. The "Click"
you heard is very important.
b: Spool Pin is used for holding
the spool of thread in order to feed
the thread to the machine. To use,
pull the spool pin out and place the
spool of thread over it, To store,
remove the spool of thread and
push back.
c: Place the spool of thread onto the
spool pin.
Pull the thread from the spool and
guide it around the Thread guide
and Bobbin winder Thread guide
d: Insert the thread through one of
the holes in the Bobbin
inside to the outside.
Wind the thread a few times by
hand around the empty bobbin in a
clockwise direction.
8
click.
,
from the