Preparing To Sew; Connecting Machine To Power Supply - AEG 110 User Manual

Preparing
To
Sew
Step 1
Connecting the machine to
power supply
- Please read the important safety
instructions before use.
- Before connecting to the mains
make sure that the rated voltage
show on the rear panel matches
your mains voltage supply.
- Make sure your local voltage is
230V/240V, 50Hz.
a:
Turn
off
the
Power
Switch






.

b: Insert the Machine Plug
the
Machine Socket
c: Insert the Power Supply Plug
into
the
mains
socket.
d:
Turn
on
the
Power
Switch




turn
on
the
power
and
the
sewing
light will also automatically turn
on.
CAUTION: Ensure your fingers are
free from the needle and presser
foot area and do not press the Foot
Controller by mistake which
would automatically start the
sewing machine.
into
.
to
3