05/2014
1012151-02A
4.5
Ending the application
The application ends automatically after the set time has expired. The EN-
ERGIZING LIGHT lamps switch back off.
The warm-down time of the device fan starts. The time is shown in the display
and counts down. The duration of the warm-down time can be determined in
the presettings, see page 47.
NOTE:
The warm-down time of the fan cannot be interrupted or
stopped prematurely.
4.5.1
Interrupting the application
NOTE:
The application can only be interrupted and continued if the
pause function has been activated in the presettings, see
page 47.
If the pause function is deactivated this option is not shown
in the display.
–
Press the START/STOP button and hold it down for 3 seconds.
The time is stopped.
–
In order to continue with the application, press the button for 3 seconds
again.
4.5.2
Ending the application before the time has
expired
–
Press the START/STOP button and hold it down for 3 seconds.
Operation
Operating instructions – 29/50