05/2014
1012151-02A
–
Loosen the screws 2-3 mm.
–
Slide the support to the side.
–
Hold the filter panel with a suction cup and remove it.
–
Pull out the lamp.
–
Clean the reflector.
–
Only utilize original lamps.
–
Only touch new lamps in the handling zone.
–
Test the safety switch to ensure that it works.
The safety switch ensures that the device switches off in the event of a
faulty filter panel or when a filter panel is missing.
–
Press the button.
If the button springs back automatically then it is functional.
The assembly is the same process in reverse order.
Cleaning and maintenance
Operating instructions – 39/50