ergoline SUNRISE 480 LED ADVANCED PERFORMANCE Operating Instructions Manual page 118

Cleaning and maintenance
50/64
– The panel must be taken out past the cockpit control. Ensure that you do
not scratch the panel.
– Carefully pull the panel past the back of the cockpit control and remove to
the left.
Upper lamp cover:
– Loosen screws 3-4 mm.
– Take off the lamp cover.
Replacing lamps: see page 45.
Replacing starters: see page 47.
The assembly is the same process in reverse order.
When assembling the device please note:
– Always replace the right acrylic glass panel first.