decorflame MM360-52GCN Manual page 4

Step 8: Attach panels F and G to panel C with 4 connector screws [W]. See Fig. H.
Step 9: Slide panel B in between panels F and G. See Fig. I.
Step 10: Attach panel A to the unit, as shown in Fig. J, with 4 connector screws [W].
Step 11: Attach cable hole cover[Ub] to panel B. See Fig. K.
Fig. H Back
Fig. I Back
Fig. J Back
Fig. K FrONt
Step 12: Attach 4 door hinges [Ta] to left and right door [Q and R] with 8 mounting screws
[S]. Attach door handles [Tb] to left and right door [Q and R] with 2 door screws
[Tc]. See Fig. L.
Step 13: Slide panel E into the unit, as shown in Fig. M.
Step 14: Attach left and right door [Q and R] to panels M and N with 8 mounting screws
[S]. See Fig. N.
INSTALLATION OF FIREPLACE INSERT
Step 15: Carefully place the insert into the unit opening from the back of the mantel. The
front of insert should be flush with the front of the mantel. See Fig. O.
4
Fig. L FrONt
Fig. M FrONt
Fig. N FrONt
Fig. O Back