Configuring The Display - Mitel 6867 User Manual

Configuring the display

This section explains how to set display properties.
Setting the display
You may find the display is too bright or too dark.
Display
Home Screen
• Home screen mode
• Screen Saver Timer
Brightness
• Brightness Level
• Brightness Timer
Press the Option key.
Scroll to
Setting home screen mode:
Set the desired mode using the horizontal navigation key and confirm with the
Save
Setting the duration for the screen saver:
Enter the desired time in seconds in the input field and confirm with the
softkey.
Mitel 6867 SIP / Mitel 6869 SIP
eud-1664/1.3 – R5.0 – 06.2017
Description
Setting possibilities for the idle screen.
Set display for the idle screen (see chapter "Enter the
display text for the idle state", page 88):
Mode 1: The display text 1 for the idle screen appears on
the top left next to the line key; date and time are dis-
played in the middle.
Mode 2: Display text 1 and 2 for the idle screen appear
above date and time.
Time in seconds (0-7200 seconds) for which the back-
light should remain activated before the screen saver is
displayed.
Setting possibilities for the screen brightness.
Display brightness of level 1 (dark) to 5 (bright).
Time in seconds (1-7200 seconds) for which the back-
light is to remain on in the idle state. After this time the
brightness is dimmed. Default value is 600 seconds
(10 minutes).
Display and press the selection key.
softkey.
Personalizing your phone
Save
81