Mitel 6867 User Manual page 45

Setting up an enquiry call (you are in a call):
Press a free line key (select using the horizontal navigation key, if necessary,
and confirm with the selection key).
Enter the call number of the enquiry partner and press the
➔
Enquiry call party is called; first call partner is put on hold.
Notes: • You can also set up an enquiry call by pressing the busy lamp field key to
which you have saved the enquiry call party.
• If the other user does not answer, you can cancel the enquiry call with the
Cancel
flashing line key.
Ending the enquiry call:
Press the
Recommence conversation with the first call party:
Press the
Brokering between an enquiry call party and
your call partner
You are talking with an enquiry call party and have your first call partner on
hold. You want to be able to switch back and forth between the two.
In an enquiry call you can use the brokering function to switch back and
forth between an enquiry call party and the party on hold. Brokering is pos-
sible with both internal and external users. You can also broker between
conference parties as a group and an enquiry call party.
Note: See chapter "Enquiry call during a call", page 44 for enquiry calls.
Brokering (to switch back and forth between the callers):
You are in an active call and have set up a connect to another call party with the
Enquiry function.
Press the respective flashing line key or select the other call party with the hori-
zontal navigation key.
➔
Your call partner changes. The other call party is put on hold.
Note: You can also switch between call parties by pressing the corresponding busy
lamp field key to which you have saved the call party.
Mitel 6867 SIP / Mitel 6869 SIP
eud-1664/1.3 – R5.0 – 06.2017
softkey or with the End key and recommence the first call with the
Drop softkey or the End key.
Pick up softkey or the flashing line key.
Phoning
Dial softkey.
45