Device Technology - ABB i-bus KNX Product Manual

®
ABB i-bus KNX

Device technology

2 Device technology
12 2CDC507164D0201 | DG/S x.64.1.1
®
The KNX ABB i-bus DALI Gateway
Basic DG/S x.64.1.1 is a KNX modular
installation device (MDRC) in Pro M
design for installation in the distribution
board on a 35 mm mounting rail.
It is a DALI Single-Master controller to
DALI standard EN 62386 Parts 101ed2
and 103ed1.
It supports type 0 and type 1 DALI
operating devices with DALI interfaces
to EN 62386 and these can be integrated
into a KNX building installation. The
gateway connects to the ABB i-bus
a KNX connection terminal on the device
shoulders.
The DALI Gateways differ in the number
of DALI outputs. They are equivalent, and
each of them has the same technical
properties and functions.
Up to 64 DALI devices can be connected
to each DALI output. Both "normal" lamps
(DALI type 0) and battery operated
emergency lighting (DALI type 1) can be
connected to the DALI output in a mixed
configuration.
The lamps are variably controlled via
KNX per DALI output via
- Broadcast (all lamps jointly)
- 16 lighting groups
- 64 individual lamps
- 16 scenes
- 64 self-contained emergency lights
The fault status (lamps, ballasts or
emergency lighting converters) of each
DALI device or of the lighting group is
sent on the KNX by a variety of KNX
group objects.
In addition to the standard functions, e.g.
switching, dimming and brightness value
setting with the corresponding feedback,
the DALI gateway has Staircase lighting,
Scene, Slave, Forced operation and
Block functions. The lighting groups or
individual lamps can be integrated into
an energy-efficient building automation
®
via
system via a KNX presence detector or
light controller.
Function, duration and partial duration
tests and battery tests for emergency
lighting systems with individual batteries
to EN 62386-202 can be triggered and
stopped via KNX. The results are
provided on the KNX.
The DALI gateway has a wide-range
power supply input. No separate DALI
power supply is required. The DALI
power supply for 64 DALI devices per
output is integrated into the DALI
gateway.
®
The ABB i-bus Tool permits
commissioning (DALI) and diagnostics
without the ETS.