JVC XV-SA600BK Service Manual page 8

XV-SA600BK/XV-SA602SL
2.1.5 Removing the rear panel (see Fig.2-5)
• Prior to performing the following procedure, remove
the top cover.
(1) Remove the twelve screws F attaching the rear panel
on the back of the body.
2.1.6 Removing the front panel assembly
• Prior to performing the following procedure, remove
the top cover.
• There is no need to remove the mechanism assembly.
(1) Disconnect the wire from JT102, JT103 and CN4 on
the main board respectively.
(2) Remove the one screw G attaching the front panel
assembly on the bottom of the body.
(3) Remove the four screws H attaching the foot on the bottom
of the body.
(4) Hook c and d are removed respectively, and the front
panel assembly is removed.
2.1.7 Removing the main board (see Fig.2-7)
• Prior to performing the following procedure, remove the top
cover, mechanism assembly,rear panel and surround audio
board.
(1) Disconnect the wire from JT102, JT103 and CN4 on the
main board respectively.
(2) Remove the four screws I attaching the main board
on the bottom chassis.
8
(see Fig.2-6,2-7)
•
F
Rear panel
F
F
F
Fig.2-5
G
Hook c
Front panel
assembly
H
Hook d
Foot
Fig.2-6
JT102,JT103
I
I
Main board
Fig.2-7
F
Hook d
H
Foot
Mechanism
assembly
CN4
I I