JVC XV-SA600BK Service Manual page 12

XV-SA600BK/XV-SA602SL
Pulley gear
Pulley gear bracket
2.2.6 Removing the Idle gear/pully gear/
middle gear/slitecam (See Fig.2-16 to 2-18)
• Prior to performing the followong procedure,remove
the clamper assembly,the tray,the traverse mechanism
assembly,the elevator and the motor assembly.
(1) Press the two tabs h inward and pull out idle gear.
(2) Remove the screw E attaching the pulley gear bracket.
Slide the pulley gear bracket in the direction of the
arrow and pull out the pulley gear.
(3) Slide the side cam in the direction of the arrow to
release the two joins i and remove upward.
(4) Remove the middle gear.
12
Pulley gear bracket
Motor assembly
Fig.2-16
Idle gear
E
Idle gear
Pulley gear
Slide cam
Middle gear
Joint i
Slide cam
Pulley gear
Tads h
Joint i
Fig.2-17
Middle gear
Loading base
Fig.2-18