Advertisement
7. Removing the traverse unit
1) Remove the loading tray.
2) Remove the four screws 'I' and fixtures which fix the traverse unit.
3) The traverse unit is connected with the rotary cam. Carefully remove the traverse unit by lifting
the rear side (the side with the rotation support flat spring).
I
I
Connection
Figure 9
8. Disassembling parts of the loading mechanism
1) Without removing the traverse unit, gears and belt can be removed as follows:
Rotary
Tray
gear
gear
Belt
Pulley
gear
Rotary
cam
Loading motor
Figure 10
Advertisement
