DVD PLAYER XV-N452S XV-N450B INSTRUCTIONS LPT1155-001A...
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the productʼs enclosure that may be of sufficient magnitude to constitute a risk of electric...
IMPORTANT SAFETY INSTRUCTIONS CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNERʼS MANUAL. AND THOSE MARKED ON THE PRODUCT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE. This product has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard.
To ensure proper use of this product, please read this ownerʼs manual carefully and retain it for future reference. This manual provides information on the operation and maintenance of your DVD player. Should the unit require service, contact an authorized service location. About the Symbol Display “...
• Do not use irregularly shaped CDs (e.g., heart- shaped or octagonal) since they may result in malfunctions. • This DVD player requires discs and recordings to meet certain technical standards in order to achieve optimal playback quality. Pre-recorded DVDs are automatically set to these standards.
Front Panel a 1/' STANDBY/ON Switches the unit ON and OFF. b Disc Tray Insert a disc here. c Display window Shows the current status of the unit. d Remote Sensor Point the remote control here. e Z (OPEN/CLOSE) Opens or closes the disc tray. g h i f DISPLAY Accesses On-Screen Display.
Remote Control STANDBY/ON (1/') Switches DVD Player ON and OFF. OPEN/CLOSE (Z) Opens and closes the disc tray. PAUSE/STEP ( X ) Pauses playback temporarily/ press repeatedly for frame-by-frame playback. SKIP (. / >) Go to next chapter or track.
S-Video – Connect the S-VIDEO OUT jack on the DVD Player to the S-Video in jack on the TV using the S-Video cable (S). Video – Connect the VIDEO OUT jack on the DVD player to the video in jack on the TV using the video cable (V).
Amplifier equipped with 2-channel analog stereo or Dolby Pro Logic ll / Pro Logic: Connect the left and right AUDIO OUT jacks on the DVD player to the audio left and right IN jacks on your amplifier, receiver, or stereo system, using the audio cables (A).
Displaying Disc Information on-screen You can display various information about the disc loaded on-screen. 1. Press DISPLAY to show various playback information. The displayed items differ depending on the disc type or playing status. 2. You can select an item by pressing v / V and change or select the setting by pressing b / B.
TV or monitor. If you set Progressive Scan to On in error, you must reset the unit. First, remove the disc in the DVD Player. Next, press STOP ( x ) and hold it for five seconds before releasing it. The video output will be restored to the standard setting, and a picture will once again be visible on a conventional analog TV or monitor.
AUDIO Each DVD disc has a variety of audio output options. Set the playerʼs AUDIO options according to the type of audio system you use. Dolby Digital / DTS / MPEG Bitstream – Select “Bitstream” if you connect this unitʼs DIGITAL OUT jack to an amplifier or other equipment with a Dolby Digital, DTS or MPEG decoder.
OTHERS Set Playback Control (PBC) to On or Off. On: Video CDs with PBC are played according to the PBC. Off: Video CDs with PBC are played in the same way as Audio CDs. B.L.E. (Black Level Expansion) To select the black level of playback pictures. Set your preference and monitorʼs ability.
Operations General Features Buttons Operations OPEN/CLOSE (Z) Opens or closes the disc tray. PAUSE/STEP (X) During playback, press PAUSE/STEP (X) to pause playback. Press PAUSE/STEP (X) repeatedly to play Frame-by- Frame. SKIP (. / >) During playback, press SKIP (. or >) to go to the next chapter/track or to return to the beginning of the current chapter/track.
Notes on general features: • On a Video CD with PBC, you must set PBC to Off on the setup menu to use the repeat function (See “PBC” on page 14). • If you press SKIP (>) once during Repeat Chapter (Track) playback, the repeat playback cancels.
Playing an Audio CD or MP3/WMA file This unit can play Audio CDs or MP3/WMA files. MP3/ WMA/ Audio CD Once you insert an MP3/WMA files recorded media or Audio CD, a menu appears on the TV screen. Use v / V to select a track/file and then press PLAY (N) or ENTER and playback starts.
Programmed Playback The program function enables you to store your favorite tracks from any disc in the player memory. A program can contain 30 tracks. 1. Insert an Audio CD or MP3/WMA files recorded media. AUDIO CD or MUSIC menu appears. 2.
Viewing a JPEG file This unit can play JPEG files. 1. Insert a JPEG files recording media. The PHOTO menu appears on the TV screen. 2. Press v / V to select a folder, and press ENTER. A list of files in the folder appears. 3.
Playing a DivX Movie file Using this DVD Player you can play DivX file. 1. Insert a DivX file recording media. The MOVIE menu appears on the TV screen. 2. Press v / V to select a folder, and press ENTER.
Playing a DVD VR format Disc This unit will play DVD-RW disc that is recorded using the Video Recording (VR) format. 1. Insert a disc and close the tray. It start playing automatically. 2. The DVD-VR menu appears on the TV screen when you press DVD MENU buttons while playing.
Reference Remote Control Function Remote Control C1/C2/C3 Code Switching This unit is initially set to C3 code (JVC DVD PLAYER code). You can easily change the Remote Control code to C1 (JVC VCR code), C2 (JVC DVD RECORDER code) or C3 as shown below.
Language Codes Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu. Language Code Language Abkhazian 6566 Fiji Afar 6565 Finnish Afrikaans 6570 French Albanian 8381 Frisian Ameharic 6577 Galician Arabic 6582 Georgian Armenian...
The DVD player does not start playback. The remote control • The remote control is not pointed at the remote sensor on the DVD player. does not work properly. • The remote control is too far from the DVD player.
Specifications General Power requirements: Power consumption: Dimensions (Approx.): Net weight (Approx.): Operating temperature: Operating humidity: Outputs VIDEO OUT: S-VIDEO OUT: COMPONENT VIDEO OUT: AUDIO OUT: DIGITAL OUT (COAXIAL): System Laser: Signal system: Frequency response: Signal-to-noise ratio: Harmonic distortion: Dynamic range: Accessories Video cable (1), Audio cable (1), Remote control (1), Batteries (2) Note: Design and specifications are subject to change without prior notice.