Advertisement
5. Removing the clamper plate and the clamper
1) Remove the top cover.
2) Remove the four screws 'H', and then the clamper from the loading base.
3) After removing the screws which fix the clamper, remove the three claws on the bottom to
disassemble the clamper. Take care not to damage the claws.
H
H
6. Removing the loading tray
1) Remove the clamper plate.
2) With tweezers or the like, move the part of the rotary cam which protrudes from the bottom of the
loading base to the TRAY OPEN position.
3) The tray can be moved to the TRAY OPEN position by hand.
4) Open outwards the left and right tray locks and pull out the tray.
Tray
H
H
Figure 6
Figure 7
Push
Figure 8
Clamper plate
TRAY OPEN
position
TRAY CLOSE
position
Tray lock
Tray lock
Fixture
Magnet
Advertisement
