Disassembly Procedures
1. Removing the top cover
1) Remove the two screws 'A' on the
rear and four screws 'B' on both
sides which fix the top panel.
2) Remove the top cover.
2. Removing the front panel
1) Remove the top cover.
2) Remove the screw 'C' which fixes
the terminal wire.
3) Remove the three screws 'D' which
fix the front panel on the bottom.
4) Remove connectors (CN501, CN703,
CN902 and CN905). If necessary, also
remove the tie band.
5) Remove the three claws and then the
front panel.
Claw
PHONES LEVEL knob
Tie band
Figure 3
Bx4
C
A
Figure 1
D
Claw
Figure 2
Claw