Table of Contents
Advertisement
Remote control:
Disc number
buttons
(CD1, CD2,
CD3)
7
1
Load discs onto the 3-CD Changer disc trays
(see page 10).
2
Press one of the disc number buttons (CD1, CD2
or CD3).
The CD PLAYER indicator lights up on the display and
3-CD Changer reads out the disc contents.
The playback starts with the first track of the selected
disc.
• 3-CD Changer stops playing after playing back all
loaded discs once.
• Pressing 3 also starts playing back with the currently
selected disc (the disc marked with
To stop playback for a moment, press 8. To resume play,
press 3. The playback starts from where it has been
stopped.
To stop during play, press 7.
About disc indicators
The disc indicator rotates when a disc
on the corresponding disc tray plays
back (in this example, CD1).
It goes off when no disc is loaded on the
CD1 disc tray.
1
This indicates the currently selected disc
tray.
• When 3 discs are loaded on the disc trays, they are played in one of
the following sequences.
• When CD 1 is pressed : CD 1 ] CD 2 ] CD 3 (then stops)
• When CD 2 is pressed : CD 2 ] CD 3 ] CD 1 (then stops)
• When CD 3 is pressed : CD 3 ] CD 1 ] CD 2 (then stops)
* If no disc is on a disc tray, 3-CD Changer skips such an empty
tray.
STANDBY/ON
CD1
CD2
CD3
1
2
3
4
5
6
7
8
9
10
10
GROUP
CONTROL
PLAY
MODE
REPEAT
CD
CDR
CONTROL CD
GROUP
SET
GROUP
8
3
on the display).
Basic Disc Operations
To start playing a disc during playback of another disc
Press one of the disc number buttons (CD1, CD2 or CD3).
The selected disc starts playing.
CD3
CD2
CD1
On the unit
To go to another track
On the unit:
Turn MULTI JOG ¢ / 4.
From the remote control:
Press ¢ or 4.
• ¢: Skips to the beginning of the next or
succeeding tracks.
• 4: Goes back to the beginning of the
current or previous tracks.
While the last track of a disc is playing, turning MULTI JOG ¢ / 4
on the unit to the right or pressing ¢ on the remote control goes to
the first track of the next disc.
To go to another track directly
From the remote control ONLY:
Select a track number using the number buttons.
Ex.: For track number 5, press 5.
For track number 15,
press +10, then 5.
For track number 20,
press +10, then 10.
For track number 32,
press +10, +10, +10, then 2.
To locate a particular point in a track during play
From the remote control ONLY:
Press and hold ¡ or 1.
• ¡: Fast-forwards the tracks.
• 1: Fast-reverses the tracks.
• If you press and hold ¡ or 1 during pause, no sound comes
out. When you release your finger from the button, the pause mode
will resume.
• While the last track of a disc is playing, holding down ¡ goes to
the first track of the next disc.
CD1
CD2
CD3
From the remote control
MULTI JOG
/ REC LEVEL
1
2
3
4
5
6
7
8
9
10
10
11
Advertisement
Chapters
Table of Contents
