Step 3.
1. Attach the bracket of Handlebar (5) onto the Rear Frame (2) and tighten with one Hex Bolt
(30), one Nylon Nut (36), and two Washers (39) by using the Hex Wrench provided.
2. Insert one Hex Bolt (28) and one Washer (39) on the other end of Handlebar by using the
Allen Wrench 5mm provided.
3. Attach the Cup Holder (13) onto the Cup Holder Rotation Cap (23).
NO. 30 Hex Bolt
M8x55
2PC
ASSEMBLY
NO. 28 Hex Bolt
M8x23
2PCS
11
Hex Wrench 1PC
Allen Wrench 5mm 1PC
NO. 36 Nylon Nut
M8
2PCS
NO. 39 Washer
Ø8.5xØ20x1.5
6CS