Table of Contents
Advertisement
SECTION 14
– Care and Maintenance
proper condition, clearance and routing
of hydraulic hoses and wires for slideout
rooms to avoid kinks or leaks and
pinched wires, etc.
EXTERIOR FINISH
The exterior surface of your motor home has
an automotive type finish. Frequent washing and
thorough cleaning is recommended to prevent
damage to the vehicle finish after exposure to
damaging salts, calcium chloride, road tar, tree
sap, insects and other foreign material. Never
wash the vehicle in direct sunlight, while the
vehicle surface is hot, or using hot water.
Do not use strong soaps or detergents for
washing the motor home. Always use a mild soap
in warm water, a commercially prepared product
for cleaning automotive finishes or your local car
wash. Be careful when using pressure-type
washers to avoid loosening exterior decals or
sealants, etc.
NOTE:Avoid aiming water flow from a hose or
spray from high pressure washing
equipment into any appliance intake
because damage or difficulty in
operating appliances may occur.
After washing the motor home, carefully
inspect caulking around window frames and
vents and any other joints that may have
separated. Recaulking, if necessary, is quite
simple. Appropriate compounds are sold at
Winnebago and Itasca dealers, and the materials
are quickly and easily applied. Also, inspect
weather seals around door, etc., and if necessary
have a dealer replace them immediately.
CAUTION
Never use a strong solvent such as
lacquer thinner, or harsh abrasives on
painted surfaces.
14-2
Waxing and Polishing
When water will not bead up and roll off the
finish of your freshly washed vehicle, it's time to
apply a new coat of wax to the finish. Wax not
only improves the appearance of the vehicle, but
protects the finish against oxidation and
corrosive substances.
We recommend using a wax that is compatible
with painted and gel-coated fiberglass finishes.
If the finish begins to look dull or discolored,
it may need to be cleaned with a polishing or
cleaning compound.
NOTE:If you use a polish or a cleaning
compound that does not contain a wax
preservative, we recommend reapplying
a coat of hard wax after cleaning or
polishing the finish.
Care of Stripes and Decals
The pressure-sensitive decals on your coach
require very little maintenance. They should be
treated like any painted surface on your vehicle.
Here are a few helpful hints on caring for decals:
•
Wash decals with plain soap and water or any
retail car wash soap. Always rinse thoroughly.
•
Keep high-pressure wash nozzles at least
1 1/2 feet from edge of decals. High pressure
water spray may damage decals and point.
•
Test any cleaning solution on a small section
of decal before using.
•
Do Not use any aromatic solvents such as
acetone, MEK, toluene, xylene, etc., on
decals. Any solvent including alcohol may
soften or smear colors.
•
Do Not use lacquer thinner on paint or decals.
•
Do Not overcoat decals with clear paint.
•
Do Not let gasoline or other fuels drip and stay
on decals for any length of time. Rinse
immediately.
Class A
Advertisement
Table of Contents
