Motorola ASTRO XTL 1500 Detailed Service Manual page 129

Digtal, vhf/uhf range 1/uhf range 2/700–800 mhz
Hide thumbs Also See for ASTRO XTL 1500:
Table of Contents

Advertisement

4-4
Error Code
FAIL 01/88
FAIL 01/90
FAIL 01/92
FAIL 01/93
FAIL 01/98
FAIL 01/AO
FAIL 01/A2
FAIL 02/81
FAIL 02/88
FAIL 02/90
FAIL 02/CO
ERROR 05/10
FAIL 05/81
ERROR 06/10
FAIL 06/81
ERROR 08/10
FAIL 08/81
ERROR 09/10
June 15, 2005
Table 4-1. Power-Up Self-Check Error Codes (Continued)
Description
External RAM Error
General Hardware
Security Partition
Checksum
FlashPORT AUTHENT
CODE Failure
Internal RAM Failure
ABACUS IC Failure/Wrong
ABACUS IC Version
Tuning Codeplug
Checksum
DSP ROM Checksum
DSP RAM Error
General DSP Hardware
Failure
Wrong Microprocessor
Version
Control Head Hardware
Error
Control Head ROM
Checksum Error
Aux Control Head
Hardware Error
Aux Control Head ROM
Checksum Error
Siren Hardware Error
Siren ROM Checksum
Error
Secure Hardware Error
Troubleshooting Procedures: Power-Up Self-Check Errors
Error Type
Corrective Action
FATAL
• Turn the radio off, then on.
• Hard bootstrap and flash the
firmware.
• Replace the daughtercard.
FATAL
• Turn the radio off, then on.
• Replace the control head or flex.
FATAL
Re-flash the codeplug sections.
FATAL
Re-flash the appropriate base
codeplug to match the radio
feature set.
FATAL
• Turn the radio off, then on.
• Hard bootstrap and flash the
firmware.
• Replace the daughtercard.
FATAL
• Re-flash tuning (codeplug).
• Retune the radio using CPS.
FATAL
• Re-flash tuning (codeplug).
• Retune the radio using CPS.
FATAL
• Turn the radio off, then on.
• Re-flash the DSP firmware
(DSP is processor-dependent).
FATAL
• Turn the radio off, then on.
• Re-flash the DSP firmware
(DSP is processor-dependent).
FATAL
• Turn the radio off, then on.
• Re-flash the DSP firmware
(DSP is processor-dependent).
• Replace daughtercard.
FATAL
• Re-flash the firmware.
• Hard bootstrap and flash the
firmware.
• Replace the daughtercard.
NON-FATAL
• Turn the radio off, then on.
• Replace the control head or flex.
FATAL
Replace the control head.
NON-FATAL
• Turn the radio off, then on.
• Replace the control head or flex.
FATAL
Replace the auxiliary control
head.
NON-FATAL
• Turn the radio off, then on.
• Check the siren cable
connection.
FATAL
Replace the siren.
NON-FATAL
Replace the secure module.
6815854H01-A

Advertisement

Table of Contents
loading

Table of Contents