5-10
5.4
Troubleshooting Test Points
The following figures show the location of the main board test points for measuring voltages and
viewing waveforms.
5.5
Board ID Jumper Configuration
The following jumper table
what board revision you have. This can be helpful in the event a jumper was placed incorrectly or
was removed during a repair and the radio is not functioning correctly.
This table provides two types of information:
• RF band of the radio
• Overall revision of the main board and controller section
June 15, 2005
ID0
ID1
ID7
ID6 ID5 ID3
ID2
Figure 5-1. Main Board Test Points—Top Side
Figure 5-2. Main Board Test Points—Bottom Side
(Table 5-5 on page
Troubleshooting Charts: Troubleshooting Test Points
ID4
5-11) is provided for troubleshooting and determining
MAEPF-27802-O
MAEPF-27801-O
6815854H01-A