Unitron iCube Instruction Manual page 7

CableFree Fitting via Bluetooth connection. However,
there are locations where Bluetooth connections are
not allowed, so iCube can alternatively be used with a
USB connection. In either case, before you can start
using your iCube it needs to be connected with your
computer.
Before you continue, make sure the iCube battery
charge is high.
Connecting via Bluetooth
Connecting your iCube via Bluetooth is done in three
steps:
1. Prepare the Bluetooth connection on your
computer
To use iCube wireless via Bluetooth, make sure that
you have Bluetooth activated. If your computer is
equipped with Bluetooth built in, find the Bluetooth
setting and activate it. For specific instructions please
refer to the documentation of the computer and
operating system you are using.
If you are using NoahLink and you have already
installed the corresponding external Bluetooth
adaptor, you can use that same adaptor for iCube. If
your computer is neither equipped with Bluetooth
built in nor with a NoahLink compatible Bluetooth
adaptor, use the Bluetooth adaptor accessory
provided by Unitron.
Refer to the "quick start guide" document available
with the adaptor's Software CD and follow the
5