Using Icube - Unitron iCube Instruction Manual

Continue by selecting to either "write to instrument(s)"
or to "read from instrument(s) .
Now the hearing instruments and iCube are ready for
fitting. During the programming of hearing instruments,
the right side and the left side fitting indicator flash fast
red, and blue, respectively.

Using iCube

Programming hearing instruments without clients
When programming hearing instruments without
having your clients wear them, make sure they are in
range of iCube.
If, for some reason, iCube becomes unresponsive,
remove the cover by sliding it upwards. Press the reset
button. The Bluetooth pairing will not be lost.
If all three indicators on your iCube are lit solid, this
may indicate a software problem. Refer to
Troubleshooting section.
11