Unitron iCube Instruction Manual page 10

Removing a Bluetooth pairing
If you wish to remove the Bluetooth pairing from your
iCube, press and hold the Bluetooth pairing button for
about 10 seconds until the Bluetooth indicator is lit
solid blue.
Connecting via USB cable
If you wish to connect your iCube via USB cable
instead of Bluetooth, start the "iCube configuration "
in the U:fit fitting application and choose to use iCube
via USB cable.
When prompted by the wizard, connect the Mini USB
plug of the enclosed USB cable as indicated below.
Attach the other end of the cable to a USB socket of
your computer.
Use the optional USB hub accessory if there is no free
USB socket on your computer.
When connecting iCube for the first time via USB, your
computer will start searching for the associated driver
software. Depending on the operating system, you
8