Unitron iCube Instruction Manual page 12

(Re)connecting the neckloop will activate the built-in
antenna and enable iCube to operate correctly.
Batteries need to be inserted into the hearing aids and
hearing aids need to be turned on prior to detection.
Detecting and programming hearing instruments
In wireless fitting, where there are no left and right
fitting cables, the assignment of left/right is done via
U:fit. Click the "Detect" button on the
detection screen. A "detection complete" screen
appears showing the detected hearing instruments
Assign (or reassign) each hearing instrument to the
desired side (left or right). You can play a beep
identification to confirm that left and right have been
selected properly.
10