REMEHA iSense Pro DIN AD280 Installation And Service Manual page 66

7. Troubleshooting
After Sales level - #TEST INPUTS menu
Parameter
(1)
PHONE REM.
(2)
I.SYST
(3)
R.CTRL B
(3)
R.CTRL C
(1) The parameter is only displayed if IN 0-10V is set to OFF
(2) According to the setting of the I.SYST parameter
(3) The parameter is only displayed for the options, circuits or sensors actually connected
After Sales level - #INFORMATION menu
Parameter Adjustment range Description
S/N SCU
CTRL
(2)
MC.VERSION
CALIBRA.CLOCK
(1) The menu is displayed only if the INSTALLATION parameter is set to EXTENDED
(2) The parameter is only displayed for the options, circuits or sensors actually connected
After Sales level - #CONFIGURATION menu
Parameter Adjustment range Description
MONO/ ALL.CIRC. To chose if the exemption made for one remote control applies to a single circuit (MONO) or
MODE:
65
Status Description
Status of the telephone inlet
0 / 1
Status of the telephone inlet
0 / 1
Presence of a remote control B
ON
No remote control B
NO
Presence of a remote control C
ON
No remote control C
NO
(1)
Serial no. of the iSense Pro DIN control panel
Control version
Version of the boiler radio module programme
Clock calibration
if it must be transmitted to a group of circuits (ALL CIRC)
iSense Pro DIN - AD280
22/11/2012 - 300025649-001-01