Power Supply Leds - Cisco Nexus 7702 Hardware Installation Manual

Power Supply LEDs

LED
Link (for
each port)
Power Supply LEDs
Depending on the power supply (AC, DC and HVAC/HVDC power supplies), there are 1 or 2 input LEDs. The Output, Fault, and
ID LEDs have the same function for the AC, DC and HVAC/HVDC power supply units.
LED
Input 1
Input 2
(available
only on DC
power
supply
units)
Output
Fault
ID
Cisco Nexus 7702 Hardware Installation Guide
126
Color Status
Green The port is active (the link is connected and active).
Orange The port is disabled by the operator or is not initializing.
Flashing orange The port is faulty and disabled.
Off The port is not active or the link is not connected.
Color Status
Green The AC, HVAC/HVDC, or DC input voltage is within the valid range.
Off The AC, HVAC/HVDC, or DC input voltage is outside the valid range.
Green The DC input voltage is within the valid range.
Off The DC input voltage is outside the valid range.
Green The AC or DC output power is within the valid range.
Off The AC or DC output power is outside the valid range.
Off The AC or DC output voltage and power supply unit tests are okay.
Flasing red Self-diagnostic tests have failed or another power supply failure has occurred.
Flashing blue The operator has activated this LED to identify this module in the chassis.
off This module is not being identified.
LEDs