Cisco Nexus 7702 Hardware Installation Manual page 91

Switch Specifications
Table 4: F3 Series 24-port, 40-Gigabit Ethernet (N77-F324FQ-25) Transceivers and Cables
Port Type
FET
QSFP+
3 FETs are used only when connecting this I/O module to a Fabric Extender (FEX).
Table 5: F3 Series 12-port, 100-Gigabit Ethernet (N77-F312CK-26) Transceivers and Cables
Port Type
CPAK
Transceivers, Connectors, and Cables Used with Each I/O Module
Transceiver or Connector
FET-40G
QSFP-40G-CSR4
QSFP-40G-SR4
QSFP-40G-SR-BD
QSFP-40G-LR4
QSFP-H40G-ACU7M
QSFP-H40G-ACU10M
QSFP-4X10G-AC7M
QSFP-4X10G-AC10M
QSFP-H40G-AOC1M
QSFP-H40G-AOC2M
QSFP-H40G-AOC3M
QSFP-H40G-AOC5M
QSFP-H40G-AOC7M
QSFP-H40G-AOC10M
QSFP-4X10G-AOC1M
QSFP-4X10G-AOC2M
QSFP-4X10G-AOC3M
QSFP-4X10G-AOC5M
QSFP-4X10G-AOC7M
QSFP-4X10G-AOC10M
Transceiver or Connector
CPAK-100G-SR10
CPAK-100G-LR4
Cisco Nexus 7702 Hardware Installation Guide
Cable Type
40-Gigabit Fabric Extender
Transceiver (FET) for FEX
3
connections
Multi-mode fiber (MMF)
Single-mode fiber (SMF)
Direct attach copper, active
40GBASE-CR4 QSFP+ to four
SFP+ Twinax direct attach copper
breakout cable actve
40GBASE-AOC (Active Optical
Cable) QSFP+ cable
40GBASE-AOC QSFP+ to four
SFP+ breakout cable
Cable Type
Multi-mode fiber (MMF)
Single-mode fiber (SMF)
81