Cisco Nexus 7702 Hardware Installation Manual page 35

Installing the Switch Chassis
Step 1
Attach the two cable management frames to the chassis as follows:
a) Position one of the cable management side frame assemblies on the vertical mounting bracket attached to one side
of the front of the chassis.
b) Secure the cable management frame with two M4 screws. (see the following figure).
•
Figure 9: Attaching a Cable Management Assembly to the Chassis
1
2
c) Repeat Steps 1a through 1b to attach the other cable management frame.
◦ Two cable management side frames
◦ One cable management top hood frame
◦ One cable management bottom hood frame
◦ Two M4 and four M3 screws.
Cable management side frame
Cable management bottom hood frame
Installing Cable Management Frames onto the Chassis
3 Two M4 screws to secure the cable management
frame to front mounting bracket on chassis.
4 Four M3 screws to secure top and bottom hood
frames to the chassis.
Cisco Nexus 7702 Hardware Installation Guide
25