Saving A Report - Netscout LinkRunner AT 1000 User Manual

S R
XII. AVING A EPORT
You can save the current measurement data the tester has
collected into a report that can be viewed and printed through
the LinkRunner Manager PC application. This information
includes:
AutoTest results

Switch results

Cable test results

The LR-AT 1000 model can save up to 10 reports. The LR-AT
2000 model can save up to 50 reports.
Link-Live Cloud Service automatically uploads the results
from AutoTest only.
To save the measurement data collected on the tester:
1 Press . The tester shows a default filename at the
P
bottom of the screen.
 To save the data with the filename shown, press
Save. The tester saves the data into a report file.
 To overwrite a report that is saved on the tester, highlight
the report, press
L
 To change the filename, press
Note
, press Save, then press

 Edit.
Report names can have a maximum of 12 characters. The
extension LRS is appended when the file is saved to your PC
through the LinkRunner Manager PC application.
 To delete characters in the filename, press
Backspace.
 To add characters to the filename, use
highlight a character, then press
 To move the cursor in the filename, highlight the
filename, then press
 To save the report with the edited filename, press
Save, then press
To view the report, open it in Link-Live Cloud Service or
LinkRunner Manager. Refer to the LinkRunner Manager help for
instructions.


OK.
28

Saving a Report

Note

  
.
L
.
 
 Save.
to
