Whirlpool Vessi Use And Care Manual page 15

SETTING UP YOUR VESSI™ FERMENTOR
& DISPENSER
Reinstall the back panel by placing
the tabs in the slots at the bottom
10
of the cabinet and firmly pushing
the strike at the top of the panel
into the catch on the cabinet�
The gas system is now ready for
use� The 3-way valve on the control
panel determines whether the
11
gas pressure is Off, pressurizing
the LIS, or pressurizing the
fermentation vessel�
SETTING UP YOUR VESSI™ FERMENTOR & DISPENSER | 15
TO REPLACE THE CO2 TANK
1
Close the CO
Relieve pressure to the gas line by
2
pulling on the regulator pressure
relief valve�
Collar
Remove white CO
the regulator� Press up on the collar
while pulling down on the gas line�
3
NOTE: Remove the CO
regulator before taking the empty
CO tank to be refilled�
2
Repeat steps 1 through 9 in the
4
"Install CO Tank" section to
2
reinstall the CO
tank valve�
2
supply line from
2
tank
2
tank�
2