Setting Fermentation Pressure - Whirlpool Vessi Use And Care Manual

USING YOUR VESSI™ FERMENTOR
& DISPENSER
SETTING FERMENTATION
PRESSURE
FERMENTING WITH PRESSURE
IMPORTANT: Check that the faucet
is in the Off/back position to avoid
leakage during fermentation�
1
Turn the Adjustable Pressure
Relief Valve (APRV) clockwise
until it stops� The APRV is now set
to the maximum pressure setting�
Turn the 3-way pressure knob to
the left to PRESSURIZE VESSEL�
The pressure displayed on the
gauge will rise� It is recommended
2
that pressure be set at less than
15 psi for optimal fermentation�
Once the desired pressure is
reached, turn the 3-way valve
knob to OFF�
Turn the APRV counterclockwise�
Listen closely for gas to begin to
3
release� Stop turning the APRV
immediately� Your fermentation
pressure is now set�
Pull up on the APRV to release the
pressure� Verify on the pressure
4
gauge that the vessel pressure is
at 0 psi�
NOTE: Pressure will naturally rise during
the fermentation process� When the
pressure in your vessel reaches your set
pressure, all excess CO
USING YOUR VESSI™ FERMENTOR & DISPENSER | 31
will release�
2