Sediment Removal - Whirlpool Vessi Use And Care Manual

USING YOUR VESSI™ FERMENTOR
& DISPENSER

SEDIMENT REMOVAL

Adjust vessel pressure to between
1
8 and 10 psi�
Squirt sanitizer into the bottom
2
of the SRS�
Slide the purge tank over the flange
3
on the bottom of the SRS� Check
that the purge tank is fully engaged�
Insert the SRS handle and turn 180°
to the end of the groove to allow
sediment to dispense into the
purge tank�
Continue to turn the handle back
and forth 3-5 times until a large
4
portion of the heavy solids are
removed�
NOTE: The groove may be on the
left or right and the stopper may be
on the top or bottom, depending
upon your assembly� This is normal�
Replace the purge tank�
Repeat steps 1thorugh 5 twice
5
per day until all sediment has
been removed�
USING YOUR VESSI™ FERMENTOR & DISPENSER | 35