Sanitizing - Whirlpool Vessi Use And Care Manual

CLEANING AND SANITIZING YOUR VESSI™
FERMENTOR & DISPENSER

SANITIZING

Fill a 90° squeeze bottle with
1
prepared sanitizing liquid�
Remove the 8" stainless steel cap,
gasket, and tri-clamp and place in
2
sanitizing liquid along with the SRS
components�
LIS cap
Remove the LIS cap and pour
prepared sanitizing liquid into
the LIS reservoir until it slightly
overflows�
3
Place the LIS cap into sanitizing
liquid with the SRS components�
Let the LIS and cap soak according
to the sanitizer manufacturer's
instructions� Replace cap�
Refill the squeeze bottle with
sanitizing liquid� Coat the inside of
the vessel as well as the groove
and neck at the top of the vessel
4
with the sanitizing liquid�
IMPORTANT: Ensure all surfaces
have been coated with the
sanitizing liquid�
24 | CLEANING AND SANITIZING YOUR VESSI™ FERMENTOR & DISPENSER
CO port
2
Inject sanitizing liquid into the vessel
CO port� Empty the remaining
5
2
contents of the squeeze bottle into
the vessel�
Remove the 8" stainless steel cap,
gasket, and tri-clamp from the
6
sanitizing liquid� Replace onto
the vessel�
Repeat the "Cleaning the Beverage
Lines" section using sanitizing liquid
to thoroughly sanitize the Vessi™
7
Fermentor & Dispenser�
NOTE: Follow the sanitizer
manufacturer's recommended
soak times�
See the "Sediment Removal System
(SRS) Assembly" section to reassemble
the SRS�